SU-100
Ultra Heavy Capacity Electric Stapler

Specifications:

• Staple up to 100 sheets of 20-lb. paper or equivalent at tap of electronic footswitch!

• Re-loads in seconds with 4 sizes of staples – ¼", 3/8", ½", and 5/8"

• "Hi-Low" switch to adjust stapling impact delivers the right stapling power every job

• Portable, no mounting, sets on desk, table, bench

• Direct-drive solenoid for tight, positive clinch

• Dual adjustable locking backstop to 4 inches (10.2 cm) depth for super neat stapling!

• Jam-proof all steel staple mechanism

• Staple paper, corrugated, plastic, cardboard, cloth and more!

• Made in U.S.A.

• Completely portable ~ no mounting required

Staples:

Uses Staplex Type HO-1/4, HO-3/8, HO-1/2, HO-5/8, and HO-3/4 High Speed Staples.

Notes:

Model SU-100 is generally recommended for stapling 20+ sheets of 20-lb. paper.  Model SU-100 requires that the proper size staple be used for each stapling job based on the number of sheets of paper (or equivalent material) being stapled as noted below.  In other words, you cannot use the HO-5/8 5/8" Staple to staple 25 sheet as of 20-lb. paper because the staple leg length would be too long for that job.  

Right leg of staple should be a minimum of 1.25" (3.2 cm) from right edge of material to activate safety microswitch attached to the adjustable locking backstop on the right side of the stapling head.  Optional additional left side contact safety microswitch available on special order (to allow positioning right leg of staple closer than 1.25" from the right edge of material.)

Dimensions:

Weighs 22 lbs. (10 kg),
Dimensions: 10-½" wide, 10-¼" deep, 10" high (26.7 cm x 26 cm x 25.4 cm).

Other SU Models:

     Model SU-100: Ultra Heavy Capacity Electric Stapler – 110-125 volts, 50-60 Hz AC

     Model SU-100A: same as above for 220-330 volts, 50-60 Hz AC