S-620NFS Series
Special Footswitch Activated
Double Header Electric Stapler

Specifications:

• Especially designed for header cards (3.5" [8.9 cm] wide and larger) stapled ¾" [1.9cm] or closer to the bottom of the card - A Staplex exclusive!  

• Protruding stapling heads and special cut-aways allow operator quickly and easily to position the header card when inserting  

• Stapling heads are reversible for stapling the smallest header cards (3½" [8.9cm] wide) while holding materials in one hand!

• Drives two staples at once automatically - Cuts stapling time in half!

• Fully adjustable center distances between staples from 2" to 7-1/4" (5.1 cm to 18.4 cm)

• Evenly spaced staples for each job

• "Pop-out" front loading

• Stapling depth to 4-¼"  reach from top edge of header card for flexible staple positioning

• Made in U.S.A.

Staples:

Uses Staplex Type DS ¼" High Speed Staples 

Notes:

Footswitch activated Models have adjustable center distances between staples from 2" to 3-5/8” (5.1 cm to 9.2 cm), up to 7-1/4" (18.4 cm) center outer distance between far left and far right staples.

Other S-620NFS Series Models:

Model S-620NFS: Special Footswitch Activated Double Header Electric Stapler –
                               110-125 volts, 50-60 Hz AC

Model S-620NFSA: same as above for 220-230 volts, 50-60 Hz AC

Other models available for special applications.

Special backstops and side guides available for foot switch models on special orders.