Optional Components

SECAP POSTNETVERIFIER

The Secap PostnetVerifier™ is a dedicated vision sensor which evaluates Postnet barcodes Zip, Zip+4 and the Intelligent Mail barcode as they are being printed and compares them to USPS requirements. When mailing accuracy is everything, this is the ideal solution for detecting problems as they occur to minimize costly printing and postal read errors.

Technical Specifications

• Codes Supported:
  Postnet (Zip® and Zip+4®) and the Intelligent Mail® barcode
• Read Rate:
  6,000/hr. (postnet barcode detection)
  (At speeds over 6,000/hr., the PostnetVerifier™ reads every second, third or fourth piece)
• Maximum Travel Speed:
  75 in/sec (2M/sec)
• Field of View:
  85mm x 12mm
• Working Distance:
  41mm, +/- 1mm
• Light Source:
  Red 630nm LEDs
• Communications:
  10/100 BaseT Ethernet, RS232
• Equipment Interface:
  Dry contact, NO/NC

• Physical Characteristics:
  Dimensions: 2.3”W x 3.1”D x 7”H
  Power: 120 Vac, 60 Hz
• Computer Requirements*:
  Pentium® Processor, Windows®, 500MHZ, 128MB RAM, 5MB Disk Space, Ethernet, CD ROM.
  *Computer required only for setup and adjustment of PostnetVerifier™
• Standard Kit Includes:
  Verifier, Software CD, Set up Gauge, Part Detect, Power Supply, I/O Interface, Cables, Reflective Tape, User Guide, 90 Day Free Replacement Warranty
• Options:
  Mounting Kit: Mast, Extension Arm, Quick Release Clamp, Verifier Mounting Bracket
  Light Kit: Light Module, Mounting Bracket, Cable
  (Specifications subject to change without notice)
  
  Note: The PostnetVerifier™ should increase your chances of passing MERLIN®; however, it is not a substitute for other quality control procedures and, for even better results, should be used in conjunction with other procedures.PostnetVerifier is a trademark of Videk, Inc. Patents Pending. Windows is a registered trademark of Microsoft, Inc. Pentium is a registered trademark of Intel Corp. Merlin, Zip and Zip+4 are trademarks owned by the United States Postal Service.

SECAP INK MANAGEMENT SYSTEM (SIMS)

SIMS, the Secap Ink Management System, is a convenient and economical solution for extending the ink capacity of today’s high production inkjet printers. Profitability of job runs is improved by lowering ink costs and reducing operator intervention.

Technical Specifications

• Printheads Supported:
  Up to 8
• Bulk Ink Cartridge:
  Designed to hold two 350ml bulk ink cartridges
• Choice Of Ink Types For Handling Different Substrates:
  HP Versatile Black Ink
  Secap Picaso™ Ink
  (Note: Cannot mix inks in same configuration.)
• Operator Inferface:
  On/off switch
• Control Box:
  Indicates cartridges in use

• Light And Audio Indicators:
  For ink cartridge/system status
• Manual Button:
  For cartridge selection
• Physical Characteristics:
  Dimensions: 6”W x 12”D x 30”H
  (hardware/mounting bracket included)
  Weight: 14 lbs.
  Power: 115 VAC
• Included in standard package:
  Control box with electrical connections
  Regulators: 1-8 depending on configuration
  Light bar
  Hardware and mounting brackets