High Volume Tabbers

SECAP T-2000 TABBER

The T-2000 tabber is a heavy duty tabletop tabber designed to run off-line or in-line with fixed head desktop printers or production mail tables. Offers superior material handling with precise tab placement on a variety of media sizes and thicknesses. 

• Applies one, two or three tabs in one pass
• Production speeds up to 20,000 pieces per hour for single tabs and up to 15,000 pieces for double tabs
• Superior material handling with precision registration transport guides
• Precise tab placement on a variety of media size & thickness
• Easy set-up with simple to use electronic control panel
• Applies a range of adhesive material including labels, stamps, customized stickers, scratch-offs and more

Technical Specifications

• SPEED
  Production Rate:
  Single Tab: Up to 20,000 pieces/hr.
  Double Tab: Up to 15,000 pieces/hr.
  Triple Tab: Up to 12,000 pieces/hr.
  Transport Belt:
  0 to 375 ft./min.
  Tabbing Head:
  0 to 375 ft./min.
• MEDIA:
  Size:
  Minimum: 3" x 5"
  Maximum: 12" x 14"
  Thickness:
  Minimum: 20# single sheet
  Maximum: 3/8"
  Stock: Coated, bond, recycled, card   
• TABS/LABELS
  Types:
  Tabs (single, double, triple), wafer seals, labels, stamps, customized stickers, scratch-offs, machine grade paper and adhesive, clear, translucent, unperfed, vertical perfed.
  Note: Clear and transulucent tabs require an "engineered backer" with registration marks for indexing.
  

• Roll Size:
  Up to 13.5" diameter mounted on a 3" core, approximately 20,000 1" tabs or 12,500 1-1/2" tabs.
  Backer:
  Approx. 1116" - 1/4" larger than tab/label, typical gap between tabs/labels is 1/8" to 1/16"
  Width:
  Minimum: 3/4"; Maximum: 1 3/4"
• TAB PLACEMENT
  Accuracy: +/- 1/8" repeatability
• PRODUCT CHARACTERISTICS
  Dimensions: 28"W x 34.5"D x 38"H
  Weight: 160 lbs.
  Power: 115V, 5 amp
• CERTIFICATION
  TUV Pending, FCC Pending

SECAP JET 1 TABBER

Accomplish all your tabbing, labeling, stamp or decal affixing requirements with the Secap Jet 1 Tabber. Easy to set up and operate in-line or off-line with the highest productivity for today's mailing professionals. Its superb design and engineering combined with Secap's first class support offer your company years of reliable production.

• Production speeds of up to 30,000 pieces per hour
• High production tabbing with precise application
• Available in standard or wide head configuration
• Heavy duty durable construction
• Simple controls and easy job changes
• Handles a wide variety of media including labels, post-it notes, foil seals and more

Technical Specifications

• SPEED
  Production Rate:
  Single Tab: Up to 30,000 pieces/hr.
  Double Tab: Up to 24,000 pieces/hr.
  Triple Tab: Up to 18,000 pieces/hr.
  (based on 8.5” length product)
  Transport Belt:
  0 to 600 ft./min. (for tabs <2” pitch)
  0 to 375 ft./min (for tabs >2” pitch)
  Tabbing Head:
  0 to 375 ft./min.
• MEDIA
  Size:
  Minimum: 3” x 5”
  Maximum: 13.5” x 17”
  Thickness:
  Minimum: 20# single sheet
  Maximum: 5/8”
  Stock:
  Coated, bond, recycled, card
• TABS/LABELS
  Types:
  Tabs (single, double, triple), wafer seals, labels, stamps, repositional notes, customized stickers, scratchoffs, machine grade paper and adhesive, clear, translucent, unperfed, vertical perfed.
  Note: Clear and translucent tabs require an “engineered backer” with registration marks for indexing.

• Roll Size:
  Up to 19.5” diameter mounted on a 3”core, up to 50,000 3/4” tabs, 40,000 1” tabs, 12,500 1.5" tabs or 9,000 2" tabs.
  
• Backer:
  .75” to 2” for standard head
  .75” to 4.5” for wide head
  Label/Tab Length:
  .75” to 7”
• TAB PLACEMENT
  Accuracy: +/- 1/8” repeatability
• PHYSICAL CHARACTERISTICS
  Dimensions: 33”W x 37”D x 71”H
  Tabletop Height: 34.75” to 37.75”
  Weight: 350 lbs.
  Power: 115V, Single phase, 10 amp
• CERTIFICATION
  TUV, FCC
• OPTIONS
  Jet 1 Tabber is available in standard or wide head configuration.
  
  Complies with USPS specifications for tab placement and application. Specifications subject to change without notice.
  Speeds may vary depending on material and application.

Secap Jet 1 Dual Head Tabber

The Secap® Jet 1 Dual Tabbing production system accommodates the two tab / one tab requirement for leading (toe) and trailing edges (heel) for booklet mail in a single pass. Designed for inline or off-line tabbing. The dual tabber can run as a system or the integrated units can be unlocked and used as standalone units.

• Affixes tabs on the leading and trailing edges for booklet mail in a single pass
• Runs 1½” to 2” tabs and meets postal tabbing requirements for booklet mail
• Sliding deck for ease of toe and heel tab registration
• Increased production time for improved ROI on equipment investment
• Heavy duty construction for durability and reliability
• Advanced microprocessor controls accurate tab placement

Technical Specifications

• SPEED
  Production Rate:
  Single Tab: Up to 30,000 pieces/hr.
  Double Tab: Up to 24,000 pieces/hr.
  Triple Tab: Up to 18,000 pieces/hr.
  (based on 8.5” length product)
  Transport Belt:
  0 to 600 ft./min. (for tabs <2” pitch)
  0 to 375 ft./min (for tabs >2” pitch)
  Tabbing Head:
  0 to 375 ft./min.
• MEDIA
  Size:
  Minimum: 3” x 5”
  Maximum: 13.5” x 17”
  Thickness:
  Minimum: 20# single sheet
  Maximum: 5/8”
  Stock:
  Coated, bond, recycled, card
• TABS/LABELS
  Types:
  Tabs (single, double, triple), wafer seals, labels, stamps, repositional notes, customized stickers, scratchoffs, machine grade paper and adhesive, clear, translucent, unperfed, vertical perfed.
  Note: Clear and translucent tabs require an “engineered backer” with registration marks for indexing.

• Roll Size:
  Up to 19.5” diameter mounted on a 3”core, up to 50,000 3/4” tabs or 40,000 1” tabs, 12,500 1.5" tabs or 9,000 2" tabs
  Backer:
  .75” to 2” for standard head
  .75” to 4.5” for wide head
  Label/Tab Length:
  .75” to 7”
• TAB PLACEMENT
  Accuracy: +/- 1/8” repeatability
• PHYSICAL CHARACTERISTICS
  Dimensions: 33”W x 75”D x 71”H
  Tabletop Height: 34.75” to 37.75”
  Weight: 700 lbs.
  Power: 115V, Single phase, 10 amp
• OPTIONS
  Jet 1 Tabber is available in standard or wide head configuration.
  
  Complies with USPS specifications for tab placement and application. Specifications subject to change without notice.
  Speeds may vary depending on material and application.