|
| |
|
|
|
World leader in the field of
custom Tabs, Separators and Tab Index Cutters.
The only manufacturer of
machines for short runs of custom tabbed presentations.
|
|
|
Guillotine
Onglematic
5 Manual Tab-Cutter Model 5
|
|
Tab length
and cuts are proportionate to the required number of tabs or
separators. Tab
cutting positioning stop is automatically
controlled by the system’s in-built microprocessor,
which
calculates the tab length and chapter number according to the
desired number of tabs
entered on the keypad.
Specifications:
-
Manual
cutting by pressure on the handle
-
Length
of guillotine cutting : 12.6"
-
Can
cut 10-15 sheets of 20/24 lb. paper at the same time (or less
pages
if the paper is thicker like 120 lb. paper, cardboard
or
polyethylene)
-
Magnetic
lateral stop and millimeter rule + "inch rule"
-
Tab
depth up to 0.70"
-
Machine available
for the standard U.S. paper 8-1/2" x 11" to make
9" tabs
-
Cuts up to 31
equal tabs on the width and length of standard U.S. Paper
-
Positioning: Electrical
-
110 V and 220
V power supply available
-
Size & Weight:
18" x 23" x 12" - 22 lb
Ease
of Use:
-
You
select the number of tabs to cut.
-
The
positioning stop is going in the first position to cut the
first chapter.
You can cut the first chapter.
-
The
knives, with their particular forms, cut the first tabs.
-
By
pressing of the advance button, the positioning stop is going
in the
second position to cut the second tabs.
So, you can cut
the second chapter.
-
These
operations should be carried out again, part by part, up to
the
penultimate part.
The last chapter in fact remains complete and therefore
does
not require cutting.
|
|
|
|
Choice
of the tab shape :
Warning : The
different cutting shapes are not interchangeable on the CO3 and
CO5 models.
The tab shape must be determined with the order.
|
|
Standard 15° angle |
90° angle option |
Round corner option |
Double round corner
US shape option |
|
 |
 |
 |
 |
Up to
18 mm
0.70" |
Up to
18 mm
0.70" |
Up to
18 mm
0.70" |
12.7
mm
1/2" |
|
|
|
|
|
|
|
|
