|
SPECIFICATIONS:
-
Maximum Number of Drill
Heads: 10 Heads
-
Drill Sizes Available**
(2" capacity): 1/8" to 1/2" (3 mm to 13 mm)
-
Drill Sizes Available
(2-1/2" capacity): 1/4" to 1/2" (6 mm to 13 mm)
-
Center to Center
Distance Maximum: 21" (53 cm)
-
Center to Center
Distance Minimum***: 1-1/4" (3.2 cm)
-
Minimum Distance Between
Holes with Adjustable Stops: 3/8" (9.5 cm)
-
Minimum Distance Between
Holes with Fixed Gauges: 1/4" (6 mm)
-
Maximum Drilling
Capacity: 2-1/2" (6.35 cm)
-
Strokes per Minute
(adjustable): 18 to 26
-
Backgauge Adjustment: 0
to 9" (0 to 23 cm)
-
Vertical Adjustment of
Individual Heads: 1/4" (6 mm)
**Special
large hole drilling (up to 1-3/4" in diameter) is possible with
conversion kit.
***Three hole drilling heads are available
for drilling 3 holes in 1" centers
DIMENSIONS:
-
Table Size: 24" to 36"
(61 to 91 cm)
-
Table Height: 38" (96.5
cm)
-
Overall Height: 60" (152
cm)
-
Floor Space Needed: 35"
x 40" (89 to 102 cm)
-
New Weight
(approximate): 1350 lbs (675 kg)
-
Shipping Weight
(approximate): 1660 lbs (830 kg)
ELECTRICAL
(standard):
-
3 Phase, 60 Hz, AC
Pump: 3/4 HP Spindle Motor: 3 HP
-
208 Volts, 14 Amps
(service size 20 Amps) or
-
230 Volts, 12.8 Amps
(service size 20 Amps) or
-
460 Volts, 6.6 Amps
(service size 15 Amps)
ELECTRICAL
(optional):
-
Single Phase, 60 Hz, AC
Pump: 3/4 HP Spindle Motor: 3 HP
-
208 Volts, 26.5 Amps
(service size 40 Amps) or
-
230 Volts, 24.2 Amps
(service size 40 Amps)
Challenge reserves the right
to make changes to any product or specification without notice and
without responsibility to existing units.
|
