BAUM Drills - Single Spindle

• Moveable table with preset hole patterns
• Chip removal drawer from front of drill underneath table
• No tools required to install or remove bits

D1T Drill

The BAUM D1T Drill provides economical drilling in a compact space. The manually operated drilling head is powered by an electric motor. The unique table design incorporates a sliding, moveable table with preset stops to provide consistent repeatable drilling of standard hole patterns. Standard hole patterns include 2-hole and 3-hole ring binder requirements. The BAUM D1T uses the exclusive BAUM drill bit system that does not require tools to insert or remove the drill bits.

Specifications:

Maximum lift capacity: 2 in (5cm)
Maximum distance from center of hole to back gauge: 1.10 in (2.8cm)
Maximum distance from center to center of hole using table: 11.38 in (28.9cm)
Drill bit sizes available: 1/8 to 1⁄2 in dia. (3.1 to 12.7mm)
Electrical requirements: 110/1/60

• Back gage with adjustable stops for multiple hole drilling patterns
• Quiet operation
• No tools required to install or remove bits

D1F Drill

The BAUM D1F floor model drill provides economical drilling in a compact space with a rugged design. The manually operated drilling head is powered by an electric motor to rotate the drill bit The vertical movement of t he drilling bit is performed by the operator using the foot pedal to manually lower the drill bit. The unique table design incorporates a series of adjustable stops to allow the setup of multiple
hole patterns for consistent repeatability. The BAUM D1F uses the exclusive BAUM drill bit system that does not require tools to insert or remove the drill bits.

Specifications:

Maximum lift capacity: 2 in (5cm)
Maximum distance from center of hole to back gauge: 4.0 in (10.16cm)
Maximum distance from center to center of hole using table: 18.50 in (47cm)
Drill bit sizes available: 1/8 to 1⁄2 in dia. (3.1 to 12.7mm)
Electrical requirements: 110/1/60