BAUM Drills - Multiple Spindle

• 5-drilling head capacity
• Stationary table
• Positive gear driven heads
• Hydraulic operation
• Head alignment without use of tools
• Exclusive medical forms drilling capability
• Safety interlock guards
• Drill bit installation and removal without use of tools

A long standing tradition with Baum floor-model drills is how easily adjustments can be made. No tools are needed for positioning the heads. Set-up time is greatly reduced since the heads can be moved into position simply by loosening a locking knob by hand, placing the head where needed, and retightening. Drill bits can also be removed and reinserted without tools.

Likewise we build for safety. The safety interlock feature protects the operator by disabling all motors when the guard is lifted. The spindle motor remains inoperative until the guard is lowered. If the safety motor overload breakers interrupt the operation of either the spindle or the hydraulic motors, there is no need to open the electrical box to push a reset switch. They will automatically reset themselves. An overload indicator light is provided on the front conrol panel.

Specifications:

1-1/4 in” (3.18CM) center to center minimum distance between holes
Capable of drilled hole sizes using bits from 1/8 to ½ in (3.1 to 12.7cm) diameter
Full 2 inch (5.1cm) high lift capacity
Electrics: 220/1/60 or 220/1/50 or 220/3/60 or 380-415/3/50
Metric/inch scales

• 5-drilling head capacity
• Stationary table
• Positive gear driven heads
• Hydraulic operation
• Head alignment without use of tools
• Exclusive medical forms drilling capability
• Safety interlock guards
• Drill bit installation and removal without use of tools

Simplicity with Precision
The Baum floor-model drills line features easy adjustments. No tools are needed for positioning the heads. Set-up time is greatly reduced since the heads can be moved into position simply by loosening a locking lever by hand, placing the head where needed, and retightening. Drill bits can also be removed and reinserted without tools.

Hydraulically Powered for effortless Operation
The drill bits are forced into the paper using hydraulic rather than muscle power, so drilling is nearly effortless. The hydraulically powered head assembly is spring-loaded so that if the operator removes his foot from the pedal or in the event of a power outage, the head assembly will return safely to its starting position.

Designed for Operator Safety
The safety interlock feature protects the operator by disabling all motors when the guard is lifted. The spindle motor remains inoperative until the guard is lowered. The spindle and hydraulic motors can be operated independently, so setups can be done without actually drilling into the paper. A built-in hydraulic power indicator light alerts the operator that hydraulic power is activated.

If the safety motor overload breakers interrupt the operation of either the spindle or the hydraulic motors, there is no need to open the electrical box to push a reset switch. They will automatically reset themselves. An overload indicator light is provided on the front conrol panel.

Specifications:

1-1/4 in” (3.18CM) center to center minimum distance between heads
Capable of drilled hole sizes using bits from 1/8 to 1/2 in (3.1 to 12.7cm) diameter
Full 2 inch (5.1cm) high lift capacity
Electrics: 220/1/60 or 220/1/50 or 220/3/60 or 380-415/3/50
Metric/inch scales

• 5-drilling head capacity
• Moveable table traverses side to side
• Positive gear driven heads
• Ideal for drilling special forms and planners etc.
• Hydraulic operation
• Head alignment without use of tools
• Exclusive medical forms drilling capability
• Safety interlock guards
• Drill bit installation and removal without use of tools

The unique feature of the moveable table enables very close center to center hole drilling and repeatable multiple patterns by simply traversing the table from right to left or left to right and back again. A series of adjustable stops enable special hole patterns to be repeated. The traversing of the table eliminates the need to move the paper by hand to the next drilling location. This increases the quality of the drilled product since paper is not being disrupted during multiple passes of drilling.

Specifications:

1-1/4 in” (3.18CM) center to center minimum distance between holes in fixed position
3/8 in (10mm) center to center minimum distance between holes with moveable table
Capable of drilled hole sizes using bits from 1/8 to ½ in (3.1 to 12.7cm) diameter
Full 2 inch (5.1cm) high lift capacity
Electrics: 220/3/60 or 380-415/3/50
Metric/inch scales