BAUM Feeding Equipment

• Mobile design with heavy duty locking casters
• Side blow kit standard for more air distribution
• Patented Dual Front Blow Bar System
• Registration table with sheet guide standard
• Downline communication using Baum exit-sheet sensor option
• Built-in Batch Counter with ability to delay or stop at desired number
• Built-in Total Counters for current job and for lifetime
• Built-in Diagnostic Messages for errors and production productivity
• Double Sheet detector with feeder stop and diagnostic error display
• Non-contact pile height sensor to eliminate marking of sheet

BAUM 20 IPF Feeder

This unique and versatile feeder is designed to integrate with many applications requiring an independent pile feeder for longer runs, including but not limited to:  UV Coaters, Laminators, Creasing Machines, Scoring and Perforating Machines, Inkjet Bases, Die Cutters and more!

The BAUM 20 IPF incorporates all of the well proven and reliable features of the BAUM 20 Series pile feed folders and adds more features to meet the needs of multiple applications.

Specifications:

Maximum sheet size: 20.5 in wide x 33 in long (52.07 cm x 84 cm)
Minimum sheet size: 4 in wide x 6 in long (10.16 cm x 15.24 cm)
Speed: infinite from 0-8200 inches /min (203m/min) using AC inverter drive
Electrics: 220/1/60 or 220/1/50
Metric/inch scales
Adjustable sheet gap from 0.2 in to 98 in (0.5 cm to 249 cm)
Learning mode for optimal sheet feeding
“one sheet” test feed mode

• Mobile Design
• Variable Speed DC Drive
• Sealed ball bearings

MILT20 Transfer Table

BAUM provides more than standard folding solutions by utilizing select folding machine modules for other applications.  MILT is the short version name for Mobile Independent Left hand Transfer conveyor. These unique units have several applications:

• To transport stitched booklets from stitchers or bookletmakers where a fold is needed parallel to the spine of the booklet to make the flat size smaller for mailings. A BAUMK20 Knife folder is used to make the parallel fold after the MILT transfers the booklet.
• To sequence sheets back into order from multiple up east/west, north/south printing
• Can be used as in-line registration table with various inkjet and remoistenable gluing applications
• Used in place of Bump-Turn table

Specifications:

Maximum sheet size 20.5″ x 20.5″ (52.07cm x 52.07cm)
Minimum sheet width 4.0″ (10.16cm)
Electrics: 220 / 1ph / 60Hz (also available with 220V/1Ph/50Hz)
Speed – 100 to 600 Feet Per Minute (30.48 to 182.88 meters/min)
Adjustable Height from 23 to 36 inches (58.42 to 91.44cm)
Overall Length of 48 in (122cm)

• Mobile Design
• Variable Speed DC Drive
• Sealed ball bearings

MIRT20 Transfer Table

BAUM provides more than standard folding solutions by utilizing select folding machine modules for other applications. MIRT is the short version name for Mobile Independent Right Hand Transfer conveyor.  These unique units have several applications:

• To transport stitched booklets from stitchers or bookletmakers where a fold is needed parallel to the spine of the booklet to make the flat size smaller for mailings. A BAUM K20 Knife folder is used to make the parallel fold after the MIRT transfers the booklet.
• To sequence sheets back into order from multiple up east/west, north/south printing
• Can be used as in-line registration table with various inkjet and remoistenable gluing applications
• Used in place of Bump-Turn table

Specifications:

Maximum sheet size 20.5″ x 20.5″ (52.07cm x 52.07cm)
Minimum sheet width 4.0″ (10.16cm)
Electrics: 220 / 1ph / 60Hz.
(also available with 220V/1Ph/50Hz)
Speed – 100 to 600 Feet Per Minute (30.48 to 182.88 meters/min)
Adjustable Height from 23 to 36 inches (58.42 to 91.44cm)
Overall Length of 48 in (122cm)